Filter
Top Products
Function
24
To listen through the FM receiver speaker (HX300G only)
Adjusting Volume
Function Audio
Press the VOLUME ∧, ∨ button on the remote control.
• If FM Wireless Audio is On, it does not function. Adjust with FM receiver.
• You can use this function through the MENU button.
1. Press the Q.MENU button on the remote control.
2. Press the ＜, ＞ buttons to move to Audio.
3. Press the ∧, ∨ button to select a desired item.
ꔂMove ꔉOK
AUDIO
FM Wireless Audio : Off
• Frequency 88.5 MHz
Volume 50
Balance 0
Treble 0
L R
1. Press the MENU button. Then, move to AUDIO with the
∧, ∨, ＜, ＞ buttons and press the ◉OK button.
2. Press the ∧, ∨ buttons to move to FM Wireless Audio
and press the ◉OK button.
3. Press the ∧, ∨ buttons to move to On and press the
◉OK button.
4. Press the ∧, ∨ buttons to move to Frequency and press the ◉OK button.
5. Press the ＜, ＞ buttons to adjusting frequency and press the ◉OK button.
6. Set the frequency of FM receiver to the frequency of the set projector.
• Setting FM Wireless Audio as On disables Mute/Volume/Balance/Treble functions.
• There may be differences in the reception distance and the audio quality according to the type of FM receiver and
installation locations.
• FM frequency can be set between 88.5 MHz ~95.5 MHz.
• If you don’t use the FM receiver or audio signals from the projector, Off should be selected.
• When power is back on, it is changed to Off status.
• Press the BACK button to exit the menu screen.
Audio
L+R
• This function enables if connected a headphone.
• Press the BACK button to exit the menu screen.
ꔗ
L+R
ꔃ
ꔗ
R+R
ꔃ ꔗ
L+L
ꔃ