Filter
Top Products
39
VIDEO /
AUDIO
- Select Mono sound mode if the signal is not clear or in poor signal reception areas.
- STEREO and SAP modes are available only if included on the broadcast signal.
On-screen display in stereo mode: STEREO
On-screen display in bilingual mode: SAP
- Bilingual (second audio program) signal
● This signal contains the secondary language signal in addition to the primary language.
● There are primary and secondary language and stereo modes in bilingual signals.
● [MONO]: The primary language is heard from left and right speakers in mono sound.
● [STEREO]: The primary language is heard from left and right speakers in stereo sound.
● [SAP]: The secondary language is heard from both left and right speakers in mono sound.
Mono
Stereo
SAP
Selecting Bilingual Signal (Second
Selecting Bilingual Signal (Second
Audio Program)
Audio Program)
1
Press the mts button on the remote control.
3
Press the enter (
A
) button to save.
2
Use the mts button to change the audio mode.
● Each press of mts button changes the audio mode as
shown below.