Filter
Top Products
A21
Specifications L194WTM
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
(without speaker)
Dimensions
&Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base
Signal cable
Power cord
19 inches (48.2 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
19 inches viewable
0.2835 mm pixel pitch
Horizontal Freq. Analog : 30 - 83 kHz (Automatic)
Digital : 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative
SOG (Sync On Green),Digital
Signal Input 15 pin D-Sub Connector
DVI - D connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max Analog : VESA 1440 x 900 @75 Hz
Digital : VESA 1440 x 900 @60 Hz
Recommend VESA 1440 x 900 @60 Hz
DDC 2B
0n Mode
: 34 W(Typ.)
Sleep Mode ≤ 1 W
Off Mode ≤ 1 W
With Stand Without Stand
Width 43.48 cm / 17.11 inches 43.48 cm / 17.11 inches
Height 36.99 cm / 14.56 inches 28.73 cm / 11.31 inches
Depth 22.60 cm / 8.89 inches 5.87 cm / 2.31 inches
Net 3.6 kg (7.94 lbs)
Tilt -5˚~20˚
AC 100-240V~ 50/60Hz 0.8A
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Attached ( ), Detached ( O )
Wall-outlet type or PC-outlet type
Audio RMS Audio Output
1W+1W(R+L)
Input Sensitivity
0.7Vrms
Speaker Impedance
16Ω
NOTE
Information in this document is subject to change without notice.