Filter
Top Products
46
SOUND CONTROL
I/II
AA
MMoonnoo ssoouunndd sseelleeccttiioonn
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved.
To switch back to stereo.
AA
LLaanngguuaaggee sseelleeccttiioonn ffoorr dduuaall llaanngguuaaggee bbrrooaaddccaasstt
If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II.
DDUUAALL II
Sends the primary broadcast language to the loudspeakers.
DDUUAALL IIII
Sends the secondary broadcast language to the loudspeakers.
DDUUAALL II++IIII
Sends a separate language to each loudspeaker.
BBrrooaaddccaasstt
Mono
Stereo
Dual
OOnn SSccrreeeenn DDiissppllaayy
MMOONNOO
SSTTEERREEOO
DDUUAALL II,, DDUUAALL IIII,, DDUUAALL II++IIII
Stereo/Dual Reception
When a programme is selected, the sound information for the station appears with the programme number and station
name.
Press the
II//IIII
button and then
DD
//
EE
button.
1
When NICAM MONO is received, you can select NICAM MONO or FM MONO.
When NICAM stere is received, you can select NICAM STEREO or FM MONO.
If the stereo signal is weak,switch to FM MONO.
When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or
NICAM DUAL I+II or FM MONO.
1
2
3
Speaker Sound Output Selection
NICAM Reception
In AV, Component, RGB-PC, HDMI and DVI mode, you can select output sound for the left and right loudspeakers.
Select the sound output.
LL++RR::
Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input is sent to
the right loudspeaker.
LL++LL::
Audio signal from audio L input is sent to left and right loudspeakers.
RR++RR::
Audio signal from audio R input is sent to left and right loudspeakers.
If the set is equipped with a receiver for NICAM reception,high quality NICAM (Near Instantaneous Companding Audio
Multiplex)digital sound can be received.
Sound output can be selected according to the type of broadcast received.