Filter
Top Products
A24
Specifications N1942L
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base
Power cord
19 inches (48.2 cm) Flat Panel Active matrix-TFT LCD
, Anti-
Glare coating
Visible diagonal size: 48.2 cm
0.294 mm pixel pitch
D-SUB Horizontal Freq. 30 - 66 kHz (Automatic)
Vertical Freq. 57 - 63 Hz (Automatic)
D-SUB support 60Hz only(except Dos mode)
X-PORT 1440 x 900 (60Hz) 1280 x 720 (60Hz)
1280 x 1024 (60Hz) 800 x 600 (72Hz)
1024 x 768 (60Hz)
D-SUB Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)
X-PORT Signal Input X-PORT Connector
Input Form X-PORT Signal
Max VESA 1280 x 1024 @60 Hz
Recommend D-SUB VESA 1280 x 1024 @60 Hz
X-PORT VESA 1024 x 768 @60 Hz
DDC 2B (Only for
D-SUB Input
)
On Mode
: 40 W(Max.)
Sleep Mode ≤ 1 W
Off Mode ≤ 1 W
With Stand Without Stand
Width 40.63 cm / 16.00 inches 40.63 cm / 16.00 inches
Height 41.97 cm / 16.52 inches 34.45 cm / 13.56 inches
Depth 18.48 cm / 7.28 inches 5.99 cm / 2.36 inches
Net 3.5 kg (7.78 lbs)
Tilt -5˚~ 20˚
AC 100-240V~ 50/60Hz 0.8A
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
NOTE
Information in this document is subject to change without notice.