LG Electronics RD-JT31 800X600 SVGA Projector User Manual


 
20
DLP Personal Projector
MAINTENANCE
Lamp Information
Use and Replacement of the Lamp
The lamp life is 1500 hours. When the Power Indicator lights up red and the
Lamp Indicator lights up orange or a message appears suggesting the time of
lamp replacement, please install a new lamp or consult your dealer. An old lamp
could cause a malfunction in the projector and in rare instances may even
explode.
Lamp Replacement
Please check with LG service center for the information of lamp replacement.
Caution
HIGH VOLTAGE/ HIGH TEMPERATURE/ HIGH PRESS
WHEN REPLACING THE LAMP, TURN OFF THE PROJECTOR AND PULL
OUT THE CORD FROM THE RECEPTACLE BEFORE REPLACING THE
LAMP.
WAIT UNTIL THE LAMP BECOMES COOL (MINIMUM 45 MINUTES).
TOUCHING THE LAMP WHEN IT IS HOT MAY CAUSE A BURN ON YOUR
HAND.
HIGH-PRESSURE LAMP WHEN HOT MAY EXPLODE IF IMPROPERLY HAN-
DLED.
To reduce the risk of injuries to fingers and damage to internal compo-
nents, use caution when removing lamp glass that has shattered into sharp
pieces.
To reduce the risk of injuries to fingers and/or compromising image quality
by touching the lens, do not touch the empty lamp compartment when the
lamp is removed.
This lamp contains mercury. Consult your local hazardous waste regula-
tions to dispose of this lamp in a proper manner.