Filter
Top Products
_,Thescreencoloris
monoorabnormal.
_,Thescreenblinks.
• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
•Make sure the video card is properly inserted in
the slot.
•Set the color setting higher than 24 bits (true color)
at Control Panel -Settings
• Check if the screen is set to interlace mode and if
yes,change it to the recommend resolution.
_, Have you installed
the display driver?
_, Do you see an
"Unrecognized monitor,
Plug&Play (VESADDC)
monitor found"
message?
• Be sure to install the display driver from the display
driver CD (or diskette)that comes with your
display.Or,you can also download the driver from
our web site:http://www.lge.com.
• Makesureto check ifthe videocard supports
Plug&Playfunction.