Filter
Top Products
Connecting with the PC/AV equipment
1.Beforesetting up the monitor, ensurethat the powerto the monitor, the computer system, and
other attached devicesis turned off.
2. Connect thesignal cable @. When attached, tighten the thumbscrews tosecure the
connection.
3, Connectthe Q '
power cable with the AC-DC adapter (AC-DC power supply)O' and then
plug the cable in the outle
t._,.,
_ Connect DVI-D(Digitalsignal) Cable
Q, Connect D-sub(Analog signal)Cable
_ Connect HDMI Cable
HDMI Headphone output
Variesaccordingtomodel.
Headphones
/ Earphones
Wall-outlet type
HDMI is optimized onthe AV equipment.Not supported PC.
PC
DVI-D (This feature isnot
available inall countries.)
PC
iJWhen aD-SubsignalinputcableconnectorforMacintosh
%
using
_a_c_a__ _Ca
p : pp c'ntosh use, a separate plug adapter
is needed to change the 15pin high density (3 row) D-sub VGA
_ connector on the supplied cable to a