Liebert 2700VA Power Supply User Manual


 
21
If the configuration program is used with an earlier UPS model (with an
earlier UPS firmware version) that does not support the modification of
these settings, the Options tab will display a reminder of the factory
default settings. These cannot be changed.
UPS INTELLIGENT COMMUNICATIONS
The UPStation GXT 2U is equipped with an Intellislot
®
port to provide
advanced communication and monitoring options.
Liebert’s MultiLink software continually monitors the UPS and can shut
down your computer or server in the event of an extended power failure.
MultiLink can also be configured for use without the serial cable when the
Intellislot SNMP/Web card is installed in the UPS. Additionally, MultiLink
can be configured to coordinate shutdown across the network with other
computers running MultiLink when you purchase a MultiLink License Kit.
For more information about the Intellislot SNMP/Web Card and MultiLink
License Kits, visit our Web site (www.liebert.com) or contact your local
dealer or Liebert representative.
Several option cards are available for use in the Intellislot port of the
UPStation GXT 2U. The Intellislot SNMP/Web Card provides SNMP and
Web-based monitoring and control of the UPS across the network.
The Intellislot MultiPort 4 Card allows you to install MultiLink software on
four computers and coordinate shutdown in the event of a power failure.
The Intellislot Relay Card provides dry contact relay outputs for custom-
wired applications and delivers support for built-in shutdown for AS/400
systems.
!
CAUTION
To maintain safety (SELV) barriers and for electromagnetic
compatibility, signal cables should be segregated and run
separate from all other power cables, where applicable.