Filter
Top Products
24
Limited Warranty
(for U.S. Sales and Installations)
We are pleased that you have purchased the Little Glass House™ product to
enhance the environment and the reliability of the available AC power for
your sensitive electronic equipment.
Liebert Corporation warrants to the original user all parts that make up the
Little Glass House for a period of thirteen (13) months from the factory ship
date or proof of purchase date, including the LGH enclosure and the
Environmental Control Module (ECM). The UPS module and batteries have
a parts warranty of twenty-four (24) months from factory ship date or proof of
purchase date. Complete removal of the UPS and Environmental Control
Module is required for warranty field replacement. Extended warranty
contracts are available for the Little Glass House.
Note that the limited warranty for the Little Glass House is for parts only.
NOTE: UPS Warranty is void if the battery is allowed to discharge below the
minimum battery voltage cutoff point.
CAUTION: To prevent excessive battery discharge. DO NOT leave the UPS
POWER switch ON for more than 2 days without AC/mains power being
supplied to the UPS. The battery must be recharged every 4 to 6 months if
not in use.
Circuit breaker resetting is not covered by this warranty and may indicate use
beyond capability of the product. No warranty applies to products which have
been abused, mishandled, modified, damaged by act of God or source
external to the product, repaired by others, or which have product serial
numbers removed or altered.
There are no warranties other than that described herein. In no event will
Liebert be responsible beyond the purchase price of the product. SELLER
DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OF THE
GOODS OR THE FITNESS OF THE GOODS FOR ANY INTENDED
PURPOSES.
LIEBERT ASSUMES NO RESPONSIBILITY FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOSS
OF USE, PROFIT, OR INCOME.
To make a warranty claim for replacement of a part/module, first call your
Liebert supplier with the unit model number and serial number. He will obtain
the required warranty return authorization from Liebert Corporation.
Customer is to package and ship the defective module or part to Liebert as
outlined on the Warranty Return Tag. The Warranty Return Tag needs to be
completed with description of defect, installer's name and telephone number,
and must accompany the defective module or part back to Liebert. The
Warranty Return Tag is included with the packing of the new or reconditioned
part from Liebert.