Filter
Top Products
4
4
Trouble-shooting
If you experience any problems with the adapter, please
make sure the appropriate driver is loaded, the proper
cable is connected to the adapter port and the hub/switch
complies with the adapter specification, such as 10Mbps
10BaseT, 100Mbps 100BaseTX and 1000Mbps
1000BaseT, then check the LED.
The adapter provides LEDs to indicate network status.
Speed
The LED indicates the adapter is connected to 10BaseT,
100BaseTX, or 1000BaseT network. When the light is
OFF, it indicates that the adapter is connected to
10BaseT network. When the light is ON in green color,
it indicates that the adapter is connected to 100BaseTX
network. When the light is ON in amber color, it
indicates that the adapter is connected to 1000BaseT
network.
Link/Activity
The LED indicates if the UTP has been LINK ok or not.
When the light is OFF, it indicates that the UTP port has
not been connected or LINK not ok. When the light is
ON, it indicates that the UTP port LINK ok. When the
light is BLINKING, it indicates that there is traffic flow
on the network which the adapter is connected to.
5