Filter
Top Products
English Manual
Mounting
1. Mount the strain relief and the shielding braid or
foil as shown in the picture. The flexible strain
reliefs will avoid squeezing the solid core cables
too heavily.
2. Connect the individual wires
Note: The colour schemes TIA 568-A and TIA 568-B
must not be mixed within one network structure
3. Snap in the cover 4. Mount the cover screw
Pinout of a module confirming ISO/IEC 11081 Colour scheme for 100Base-T and 1000BaseT
Jack
Pin #
Wire colour
EIA/TIA 568A
Wire colour
EIA/TIA 568B
1 green/white orange/white
2 green orange
3 orange/white green/white
4 blue blue
5 blue/white blue/white
6 orange green
7 brown/white brown/white
8 brown brown
Terminals
Terminals
Jack Jack
Ground
connector