Filter
Top Products
8
6 PRODUCT SPECIFICATIONS
Models Twenty-Four (24) ports 100/10Mbps Fast Ethernet Switch
(For 13 inches and 19 inches width)
Standards 10BASE-T IEEE 802.3
100BASE-TX IEEE 802.3u
Ports Twenty-four (24) 100BASE-TX
Media Support 10BASE-T Category 3, 4 or 5 TP
100BASE-TX Category 5 TP
Bandwidth 100BASE-TX 200/100/20/10Mbps
Forwarding /
Filtering Rate
148,810 packets/second per port @ 100Mbps, max.
14,881 packets/second per port @ 10Mbps, max.
Latency 9 µsec @100Mbps, minimum
70 µsec @ 10Mbps, minimum
MAC Addresses 8K six (6)-bytes entries maximum, self-learning
Buffer Memory 2.5Mb
DuplexModes Auto-Negotiation
Crossover All the TP ports support Auto-MDIX function
LED Indicators One (1) for Power
One (1) per port for Link / ACT
One (1) per port for Full-Duplex /Collision
Power Supply Full range Auto-Switching
Input voltage: 100 ~ 240 +/-10% VAC/ 50 ~ 60 Hz
Power Consumption 21.5 watt max
Environment Operating Temp: 0° ~45°C(32° ~113°F)
Storage Temp: -20° ~70°C (-4° ~ 158°F)
Humidity: 10% ~ 90% non-condensing
Certifications FCC Class A
CE Mark
For 19 inches width:
442x184x44mm(17.40x7.24x1.73inches)
Dimensions
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class Acomputing device pursuant to
Part 15 of FCC Rules, which are designed to provide reasonable protection against electromagnetic interference
in a commercial environment.
Changes or modifications to the equipment not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
CE MARK WARNING
This is a ClassA product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measures.