English
Introduction
LINDY 2 & 4 port monitor splitters allow you to duplicate the video signal from your PC for output to multiple
monitors.
The 2 port splitter (Part No. 32407) outputs video to two separate monitors, while the 4 port splitter (Part No.
32408) provides video output for up to 4 separate monitors.
Features
Supports VGA, SVGA, XVGA, and Multi-sync monitors
DDC2 function supports “Plug & Play” monitors
High bandwidth up to 250MHz
High resolution support (up to 1920 x 1440)
Transmission distance up to 50m
Package contents
2 port monitor splitter (32407)
2 port monitor splitter card
Internal power cable
VGA output connection cable
Fitting screw
Instruction manual
4 port monitor splitter (32408)
4 port monitor splitter card
Internal power cable
VGA output connection cable
4-way monitor splitter cable
Fitting screw
Instruction manual
Optional video cables
To maintain optimal image quality we recommend the following LINDY Premium Gold monitor extension cables.
Installation
1. Fit the card into a spare back-plate slot and secure using the supplied screw
2. Connect the internal power connector to a 5¼” connection from the computers power supply
3. Using the VGA output connection cable, connect the computers video output to the input on the splitter card
marked ‘PC’
4. For the 2 port model connect the monitors to the connections marked ‘M1’ & ‘M2’
5. For the 4 port model connect the 4-way monitor splitter cable to the connection marked ‘M1-M2-M3-M4’. Plug
each monitor into the individual connections on the splitter cable.
2m
37230
10m
37233
30m
37236
3m 37231 15m 37234 40m 37237
5m 37232 20m 37235 50m 37238