Filter
Top Products
User Manual English
3
Installation and Operation
1. Insert the supplied FireWire cable in to the port on the back of the LINDY FireWire Repeater
Hub.
2. Connect the other end of the FireWire cable to an available FireWire port on your computer.
3. You may also attach the supplied power supply, though this should only be required for use
with FireWire peripherals with high power consumption.
No drivers are required to install the hub; however when you connect peripherals to your hub for
the first time the Windows New Hardware Installation program will prompt you to install the
software drivers for the peripheral. Follow the instructions in the User Manual that came with
your peripheral to complete this process.
Specification
Specification LINDY FireWire Repeater Hub 6 Port
Chips Texas Instruments
IEEE-1394 Speed 100/200/400 Mbps
LED 1
Connector IEEE-1394 6P Female X 6