Filter
Top Products
User Manual English
6
Speaker Configuration
Windows XP
1. From the main desktop, Click
Start
,
Control Panel
.
2. Click
Sounds and Audio Devices
.
3. Select the
Audio
tab.
4. Click
Advanced
under
Sound Playback
, and then click the
Speakers
tab.
5. Select your speaker type from the drop down list.
6. Click
OK
to save the settings.
Windows Server 2003
Make sure to login as Administrator or an account with administrator privileges.
1. From the main desktop, click
Start
,
Control Panel
.
2. Click
Sounds and Audio Devices
.
3. Select the
Audio
tab.
4. Click
Advanced
under
Sound Playback
, and then click the
speakers
tab.
5. Select your speaker type from the drop down list.
6. Click
OK
to save the settings.
Windows Vista/Server 2008
Make sure to login as Administrator or an account with administrator privileges.
1. Right click the volume control icon located in the taskbar by the system clock.
2. Click
Playback devices
, select
Speakers USB PnP
Sound Device,
and click
Configure.
3. Follow the on screen instructions to configure your speakers.
Microphone Configuration
Windows Vista
1. Right click the volume control icon located in the taskbar by the system clock.
2. Click
Playback Devices
, under the Playback tab, select
Speakers USB PnP Sound
Device
, click
Properties
.
3. Click the
Levels
tab. Click the speaker icon to either enable or mute the microphone
as indicated by the red circle (muted) next to the icon.
4. Move the slider to change the volume level.
5. Click
OK
to save the changes.
6. Click the
Recording
tab.
7. Select
Microphone USB PnP Sound Device
, click
Properties
.
8. Click
Levels
tab.
9. Move the slider to the left to increase sensitivity.
10. Click
OK
to save the changes.
11. Click the
Custom
tab.
12. Check
Microphone Boost
, click
OK
.
Note:
Microphone Boost increases
sensitivity by approximately 20dB. This
setting is optional and not needed in
most cases.