Filter
Top Products
OPERATION (ENGLISH)
Driver Installation USB 2.0
Modern operating systems like Windows XP already
include the necessary drivers provided your USB 2.0 Card
is installed correctly and drivers are up to date. If the
external Drive is recognized correctly as a USB 2.0 device
please do not install drivers again.
For other operating systems please plug in the External
Drive Box and follow the instructions.
Please also refer to the enclosed Software Installation
Manual and Installation CD of the chipset supplier.
Treiberinstallation (DEUTSCH)
USB
Moderne Betriebssysteme wie Windows XP (mit installierter
USB 2.0 Karte und aktuellen Treibern) haben bereits alle
notwendigen Treiber an Board. Sollte das externe Laufwerk
hier bereits als USB 2.0 Device erkannt werden und
funktionieren, so sollte keine erneute Treiberinstallation
vorgenommen werden.
Für andere Betriebssysteme: Schließen Sie das Laufwerks-
gehäuse an und folgen Sie den Bildschirmanweisungen.
Orientieren Si sich gegebenenfalls am beiliegenden
Software Installation Manual des Chipsatzherstellers sowie
der Installations-CD.
Installation du pilote (FRANCAIS)
Les systèmes d’exploitation actuels comme Windows XP
incluent directement le pilote USB 2.0 et il sera mis à jour
automatiquement. Si le disque dur externe est reconnu
correctement en tant que périphérique USB 2.0 n’essayez
pas de réinstaller le pilote.
Pour les autres systèmes d’exploitation, connectez le
boîtier externe et suivez les instructions.
Veuillez également vous référer au manuel fourni pour
l’installation des pilotes sous différents systèmes.
Radio Frequency Energy, Certifications
European EMC Directive CE statement
This equipment complies with the requirement for CE mentioned in
the European Directive and Standards EN55022 and EN55024.
FCC Warning
This equipment has been tested and found to comply with the
limits for a Class B Digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
Consult the dealer or an experienced technician for help
You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void your
authority to operate the equipment.
Canadian Department of Communications RFI statement
This equipment does not exceed the class B limits for radio noise
emissions from digital apparatus set out in the radio interference
regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant les limites applicables aux appareils
numériques de la classe A prescrites dans le règlement sur le
brouillage radioélectriques publié par le ministère des
Communications du Canada
LINDY No. 20694,
20695, 20698, 42913
©LINDYELECTRONICSLIMITED&LINDY-ELEKTRONIKGMBH - THIRD EDITION(JUL 2003)
For Homeand Office Use
Tested toComply withFCC Standards