Lindy 70582 Network Card User Manual


  Open as PDF
of 3
 
PAGE 2
Description
The 70582 32Bit PCI bus Plug & Play 1P I/O card is equipped with one
ECP/EPP/SPP/BPP IEEE 1284 CENTRONICS Parallel Interface. It includes
one 25 pin female connector for peripherals’ units with IEEE 1284 CENTRONICS
Parallel Interface.
Hardware Specification
Parallel Port:
Parallel Chipset: SUN1888, Hardware FIFO are 32Byte FIFO
Compatible chips: with ACC3203, ST-78C36, and HT6535.
IEEE standard: ECP/EPP/SPP/BPP (PS-II) Interface
Max. Speed: Up to 2MB/Sec
Hardware Installation
Turn off the power of your computer
Plug the 70582 Parallel Adapter into the PCI bus of your computer
Connect the peripheral Printer, Modem, Scanner… etc. to this adapter
Turn on the power of your computer
PCI device listing display (for example…)
Bus No Device No Func No Vendor ID Device ID Device Class IRQ
0 7 1 8086 7010 IDE Controller 14
0 13 0 1409 7268 Simple COMM.
Controller
10
When Vendor ID, Device ID, Device Class or IRQ aren’t displayed or an error
occurs, please change the PCI slot.
After correct hardware installation you can start installing the software from the
driver CD.
 previous