Lindy Dual Rail Modular KVM Console Switch Switch User Manual


 
Dual Rail Console For Modular KVM Switch User Guide
11
3. Installation
3.1. Install the Console into a Cabinet
3.1.1. Notes
It is essential that each step of this installation guide is completed in the stated order to
ensure a successful installation. It is highly recommended that two persons carry out the
installation.
1. Please the contents of this box against the list below, before installation.
2. Before installation, make sure all peripherals and computer have been turned off.
3. The cabinet depth range must be in 570 ~ 870 mm for the 15” and 17” console or 650 ~
950 mm for the 19” console.
4. Reliable earthing of rack-mounted equipment must always be maintained. Particular
attention should be given to supply connections other than direct connections to the
branch circuit.
3.1.2. Hardware Kits Contents
1. Rail with front and rear bracket x 2
2. Blocker x 2
Old version (2007) New version (2008)
3. Screw x 2
4. Screw (length = 6 mm) x 6
5. Key x 2