Filter
Top Products
Linksys AM300 Quick Configuration
5
6
2
3
4
1
In the Setup screen, complete the
following steps:
1
1
From the Encapsulation drop
down menu select RFC 2364
PPPoA.
Note: The page will refresh to
include the PPPoA section.
2
2
Ensure the VPI is set at 8 and the
VCI is set at 35 from the Virtual
Circuit ID: field.
3
3
Select the VC radio button from
the Multiplexing field.
4
4
From the DSL Modulation: field
select Auto.
5
5
Enter the username in the
Username field.
Refer to the Settings Page on our
website for the username format.
6
6
Enter the password in the
Password field.
Refer to the Settings Page on our
website for the password format.
Page 4 of 7