Filter
Top Products
Broadband Network Bridge
Troubleshooting
Specific Problems
1. I can't get a link at one of my ports.
• Ensure that your cabling is not damaged and that it is connected properly.
• Ensure that the network card you are connecting to has been properly
installed.
• Ensure that both the Bridge and the device are powered on.
• If you are linking to a hub or a switch, ensure that the hub or switch is
functioning correctly.
• If you are connecting to a cable modem, try plugging the cable modem
into the bridge's uplink port rather than a 10BaseT port.
• If all else fails, reset the Bridge.
9
HPES03 User Guide.qxd 3/9/00 4:48 PM Page 9