Filter
Top Products
20
Chapter 5: Setting up the Wireless A/G Game Adapter for PlayStation®2 or GameCube™
Setup Wizard Configuration for Internet Play
Wireless A/G Game Adapter
5. The Network Settings screen will appear. Enter an IP Address, IP Mask (also known as Subnet Mask), and
Gateway appropriate for your network setup. You must specify the IP Address on this screen. If you are unsure
about the IP Mask and Gateway, do not change these fields. Click the Next button
IP Address - This IP Address must be unique to your network.
IP Mask - The Game Adapter’s IP Mask must be the same as your wired network’s IP or Subnet Mask.
Gateway - Enter the IP address of your network’s Gateway here.
6. On the Confirmation screen, verify that the Game Adapter’s settings are correct. Then click the Yes button to
save these settings.
Figure 5-23: Setup Wizard’s Network Settings Screen
Figure 5-24: Setup Wizard’s Confirmation Screen
ip address: the address used to identify a computer or
device on a network
gateway: a device that interconnects networks with
different, incompatible communications protocols.
subnet mask: an address code that determines the size of
the network.