Filter
Top Products
38
Chapter 5: Configuring the Gateway
The Administration Tab
Wireless-G ADSL Gateway
Enable 802.1p P bits scheduling. VLAN’s VID. Select this option to enable 802.1p P bits classification
scheduling in the appropriate VLAN based on IEEE 802.1Q VLAN identification. Enter the VLAN VID (VLAN
Identifier) number in the field.
When you have finished making changes to this screen, click the Save Settings button to save the changes, or click the
Cancel Changes button to undo your changes.
The Administration Tab
Management
The Management screen allows you to change the Gateway’s access settings as well as configure the SNMP
(Simple Network Management Protocol) and UPnP (Universal Plug and Play) features.
Gateway Access
Local Gateway Access. To ensure the Gateway’s security, you will be asked for your password when you access
the Gateway’s Web-based Utility. The default username and password is admin.
• Gateway Username. Enter the default admin. It is recommended that you change the default username to one
of your choice.
• Gateway Password. It is recommended that you change the default password to one of your choice.
• Re-enter to confirm. Re-enter the Gateway’s new Password to confirm it.
• Remote Gateway Access. This feature allows you to access the Gateway from a remote location, via the
Internet.
• Remote Administration. This feature allows you to manage the Gateway from a remote location via the
Internet. To enable Remote Administration, click Enabled.
• Administration Port. Enter the port number you will use to remotely access the Gateway.
SNMP
SNMP is a popular network monitoring and management protocol.
Figure 5-36: Management
IMPORTANT: Enabling remote Administration allows anyone with access to your
password to configure the Gateway from somewhere else on the Internet.