Filter
Top Products
SFE2010/SFE2010P Administration Guide 52
Help
Using the Console
To edit the system mode or stacking mode:
1. Select Edit.
2. Proceed as needed:
a. Press the down a
rrow key to scroll down through the list of ports.
b. Press the Tab
key to move the cursor from one field to the next.
c. To change a setting, move the cursor to the field, and then press the Spac
e Bar until the
desired setting appears.
3. Press the Esc ke
y to move the cursor to the Action list.
4. Select Sav
e to save your settings
5. When the Oper
ation complete message appears, press the Esc key to move the cursor to the
Action list.
6. Reboot the Ethernet switch. Your new settings will take effect after reboot.
Help
You can use the Help screen to view information about the console menus and options.
To open this screen:
From the Switch Main Menu, pr
ess 5. Help.
Field Settings
System Mode after
Reset
Layer 2 or Layer 3
Stacking Mode after
Res
et
Stack or Standalone