Filter
Top Products
39
Chapter 5: Configuring the Wireless-N ADSL2+ Gateway
The Applications and Gaming Tab
Wireless-N ADSL2+ Gateway
unique identifier for your network device. When the Gateway identifies the device entered, the
Gateway will allocate the priority set for that entry. Check the device’s documentation to obtain
the MAC Address.
Priority Select the bandwidth priority for the application you selected. Select High, Medium, Normal,
or Low for the bandwidth, but don’t set all applications to High. Once you have made your
selection, click Add to add to the Summary list.
Summary
Priority This displays the bandwidth allocation priority of High, Medium, Normal, or Low, that you set
for the application.
Name This displays the application name or the entries you entered to be allocated.
Information This displays the Port Range or MAC Address entered when you added a new application. If a
pre-configured application was selected, there will be no valid entry shown in this section.
Remove This button allows you to remove the application entry. To remove the entry, click the Remove
button. To save the configuration, click the Save Settings button. Otherwise, to cancel, click
the Cancel Changes button.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes. Click Help for more information.
Figure 5-39: QoS - Add a New Application (MAC Address)