Filter
Top Products
PRODUCT DATA
Model: WRP400
Three-way Conferencing
Call ID Number & Name (Primary Line & On Call Waiting)
Call-ID Block (Prevent Send out the Caller ID)
Anonymous Call Blocking
Distinctive Ringing
Do not Disturb Setting
Repeat Dialing on Busy
Call Return
Emergency Call Support
Dial Plan
Speed Dial
Auto-Attendant
Multi-Room Meet-Me Conference
In-Band / SIP-INFO DTMF Translation
Provisioning,
Administration,
& Maintenance Web Browser Administration & Configuration via Integral Web Server
Telephone Key Pad Configuration with Interactive Voice Prompts
Automated Provisioning & Upgrade via HTTP, TFTP, HTTPS
Asynchronous Notification of Upgrade Availability via NOTIFY
Non-Intrusive, In-Service Upgrades
Report Generation & Event Logging
Stats in BYE Message
Syslog & Debug Server Records
Per Line and Purpose Configurable Syslog and Debug Options
Physical Interfaces 4 100Base-T RJ-45 Ethernet Port (IEEE 802.3)
2 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device
USB 2.0 (reserved for future use via firmware upgrade)
Buttons Reset, WPS
Subscriber Line
Interface Circuit
(SLIC) Ring Voltage: 40-90 Vpk
Ring Frequency: 20 to 25Hz
Ring Waveform: Trapezoidal with 1.2 to 1.6 Crest Factor
Maximum Ringer Load: 3 REN
On-Hook/Off-Hook Characteristics:
On-Hook Voltage (Tip/Ring): - 46 to -56V
Off-Hook Current: 18 to 25mA
Terminating Impedance:
600 ohm Resistive
270 ohm + 750ohm//150nF Complex Impedance
Frequency Response: 300 – 3400Hz
Regulatory
Compliance FCC (Part 15 Class B), CE, ICES-003, RoHS
Number of
Antennas 1
Connector type Fixed
Detachable (y/n) No
RF Pwr (EIRP)
in dBm (Average, not Including Antenna)
802.11g: Typ. 18 dBm @ Normal Temp Range (with PA)
802.11b: Typ: 20 dBm @ Normal Temp Range (with PA)
Antenna Gain
in dBi 2 dBi
UPnP able/cert Yes
Power Supply Switching Type (100-240V) Automatic
DC Input Voltage: +5 VDC at 2.0 A Max.
Power Consumption: 7.9 watts (Average)
Power Adapter: 100-240V - 50-60Hz (26-34VA) AC Input, 1.8 m Cord
Specifications