Filter
Top Products
Getting Started Guide
Logitech
HD 200a Powerline Starter Kit
2 Network adapters
2 Ethernet cables
2 wall spacers
Documentation
Power-strip Warning!
Do NOT plug the network adapter into a surge protector or power strip as they
interfere with network communication. The network adapter(s) must be plugged
directly into your wall outlet. Surge protectors are built-in to the network adapter
and protect your devices.
1
Logitech HD 200a Powerline Starter Kit
1) Plug one end of the Ethernet cable connector into the network adapter.
1a) Add the optional wall spacer.
1b) Plug the network adapter into the power outlet.
2) Connect the other end of the Ethernet cable connector into an open port on
your router.
2
1) Take the second network adapter and plug one end of the Ethernet cable
connector into the network adapter.
1a) Add the optional wall spacer.
1b) Plug the second network adapter into the power outlet by the device
you will be connecting to.
2) Connect the other end of the Ethernet cable connector into the ethernet
port of your device (i.e. gaming console, laptop, etc.).
3
Turn the device on and test.
1
INTERNET
2
3
4
1
1b
2
*
Off
2
Welcome.
Thank you for purchasing Logitech HD Powerline products. With Logitech powerline
home products you can easily network devices in your home using your home’s
existing electrical wiring. No new wires to run, no networking hassles.
Logitech HD 200a Powerline Starter Kit
1a
1
1b
1a
Quick-start
guide
Logitech
HD Powerline 200a
Networking Starter Kit
Logitech
HD Powerline 200
Networking Adapter
System Requirements
& Support Guide
(not included)