Filter
Top Products
1. Connect the 65ft DIN Extension cable to the
Switcher. Run the cable as desired, and connect
the other end of the 65ft Extension Cable to the
DIN Camera (see Setup Diagram below).
2. Attach the camera to the supplied stand. Mount
the camera stand to the desired mounting surface
3. Connect the DIN end of the A/V Cable to the
switcher. Connect the RCA end to the
corresponding color ports on the TV or VCR:
•Yellow Cable: RCA Video
•White Cable: RCA Audio
4. Connect the Power Adapter to the switcher.
Features:
• Easily connects to any TV, VCR or
Monitor
• Compact design
• Easy mounting with Velcro strip
(included)
1. Package Contents 2. Switcher Controls 3. Camera Connections
1 x Mini Switcher Box
1. SCAN TIME SETTING - Turn to adjust the Scan
Time between cameras (when in SCAN View Mode)
from 1~30 Seconds.
2. CHANNEL SELECT - Move the switch to change
the onscreen view to CH1, CH2 or SCAN View Mode.
3. STATUS INDICATOR LEDs - The Red LED light
indicates the state of the switcher: CH1, CH2 or
SCAN Mode.
4. DC POWER PORT - Connection port for the Power
Adaptor.
5. CH1~CH2 DIN PORTS - Receives the audio and
video signal from the Cameras.
6. A/V OUT DIN PORT - Sends the outgoing video/
audio signal to a TV or VCR.
1 x Power Adaptor
1 x AV Cable
1 x Velcro Adhesive
Strip
NOTE: Cameras with 6 Pin DIN
connections draw power from the
Switcher. Additional power adaptors
are not needed for these cameras.
Note:
Test the cameras prior to selecting a permanent
mounting location by temporarily connecting the
Cameras and Cables to the switcher.
2 3
1
5 6
4
Setup Diagram:
* Cameras may not be exactly as shown.
NOTE: Confirm that the arrows on the DIN
Extension cable are aligned with the Camera
Cable and Observation system ports when
connecting the cable. If the pins in the DIN
Cable are bent, the Camera will NOT
function
2 x DIN Cameras*
2 x Camera Stands
2 x 65’ DIN Extension
Cables
* Cameras may not be exactly as shown.