Filter
Top Products
3-8 Software Installation
3.2.1.1 Floppy Disk Install
If you received the drivers on a floppy diskette, follow these steps:
Step 1. Place the diskette in the floppy drive and execute the volcheck
command to ensure the system sees the floppy.
Step 2. Change the directory to the root of the floppy
(e.g. "cd /floppy/floppy0").
Step 3. Execute the pkgadd procedure to add the itmpt driver to the
operating system.
Example: pkgadd(
space
)-d(
space
).
You will see the display on the screen as shown in Figure 3.5 through
Figure 3.7.