Filter
Top Products
Physical Characteristics 2-9
Ver. 2.0 Copyright © 2002 by LSI Logic Corporation. All rights reserved.
2.6.2 LSI40919O Connector and Indicator LED
The LSI40919O I/O bracket is configured as shown in Figure 2.2. One
LC connector is used to connect the adapter channel to the Fibre
Channel subsystem. The indicator LED is used to indicate link status,
activity, and link fault.
Figure 2.2 LSI40919O Connector and Indicator LED
Table 2.5 Link Activity/Link Fault LED - LSI40919O
Link Activity Fault
Appearance of LED
Off Green Blinking Yellow
Channel 0 LED
Channel 0