Filter
Top Products
3-2 Configuring the LSIU80ALVD
3.2 Starting the SCSI BIOS Configuration Utility
If you have LSI Logic SCSI BIOS Version 4.XX, and it includes the
LSI Logic SCSI BIOS Configuration Utility, you can change the default
configuration of the SCSI host adapters. You may decide to alter these
default values if there is a conflict between device settings or if you need
to optimize system performance.
You can see the version number of your LSI Logic SCSI BIOS in a
banner displayed on your computer monitor during boot. If the utility is
available, the following message also appears on your monitor:
Press Ctrl-C to start LSI Logic Configuration Utility...
This message remains on your screen for about five seconds, giving you
time to start the utility. If you decide to press “Ctrl-C,” the message
changes to:
Please wait, invoking LSI Logic Configuration Utility...
After a brief pause, your computer monitor displays the Main Menu of the
LSI Logic SCSI BIOS Configuration Utility.
Table 3.2 Device Default Settings
Settings for Individual SCSI Devices Default Settings
Synchronous Transfer Rate (Mbytes/s) 80
Data Width 16
Disconnect On
Read Write I/O Time-out (seconds) 10
Scan for Devices at Boot Time Yes
Scan for SCSI LUNs
1
1. Logical Unit Number.
Ye s
Queue Tags On