LST LAM48-1 Network Card User Manual


 
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED
PTU288-1_DBL_LST_EN_0804.PDF • PAGE 3
ABuilding Safety. Building Security.
LED Connection Cord
The 2-wire connection cord serves to connect light
emitting diodes or relays to the LED Connection Mo-
dule LAM48-1. The cord is needed if other than the
pre-assembled LEDs are used, or if more than two Re-
lay Modules RL58-1 or RL58-2 – which can be directly
connected to the LED connection module via fl at cable
– have to be actuated.
At one end of the cord there is a connector which fi ts
to the pin connector of the LED Connection Module
LAM48-1, and the other end of the cord is open.
Specifi cations
Line length 2m
Order number 259013
Order name Cord 2-Wire for LED Connection/10pcs. LED-LEITUNG-10