Filter
Top Products
To learn more about our comprehensive
portfolio, please contact your Lucent
Technologies Sales Representative or
Lucent Business Partner, or visit our
web site at www.lucent.com.
This document is provided for planning
purposes only, and does not create,
modify or supplement any warranties
which may be made by Lucent
Technologies relating to the products
and/or services described herein. The
publication of information contained in
this document does not imply freedom
from patent or other protective rights of
Lucent Technologies or third parties.
CellPipe is a registered trademark of
Lucent Technologies Inc.
Copyright © 2003
Lucent Technologies Inc.
All rights reserved
Cell v1.0203
Specifications
11.Mechanical
Mounting: Stand-alone
Dimensions: 11.75 in. (29.845 cm) w,
1.86 in. (4.724 cm) h, 8.75 in.
(22.225 cm) d
Weight: 2.13 lb (0.97 kg)
12.Environmental
Operating Temperature: 0 to 50 ºC
(32 to 122 ºF)
Storage Temperature: -20 to 65 ºC
(-4 to 149 ºF)
Humidity: 95% maximum,
non-condensing
1.Hardware Specifications
SHDSL IAD
CBR port, user selectable E1/T1
Serial data port, user selectable V.35,
X.21, RS-232, RS-449, EIA-530
10/100 Ethernet
Management: EOC (for G.shdsl related
parameters), Web-based interface,
local supervisory port
2.Serial Interface
DTE/DCE Port: Selectable V.35, V.36,
RS-232, RS-449, EIA-530
Data Rate: Synchronous, nx64 Kbps
(where n=1-36)
Connection: DB-25 Female
Protocol: PPP, HDLC
3.LAN Interface
Ethernet Port:
10/100 Base-T auto-sensing
Protocol: TCP/IP, RIP1, RIP2, OSPF
IP Addressing: DHCP (server and client)
Security: NAT, NAPT
Bridge: IEEE 802.1D transparent,
self-learning
4.Network Interface
Line Rate: 2.304 Mbps
Line Framing:
ATM transport (G.991.2E9)
Line Coding:
Trellis Coded Pulse Amplitude
Modulation
Network Protocol: ATM
Adaptation Layer: AAL1 and AAL5
Connection: RJ-48C
Number of PVCs: Up to 16
(1 PVC for CBR port)
5.CBR Port
T1 Mode
Line Rate: 1.544 Mbps
Line Framing: D4 or ESF
Line Coding: AMI or B8ZS
Input Signal: DSX-1 to –6dB
Connection: RJ-48
E1 Mode
Line Rate: 2.048 Mbps
Line Framing: CCS, CAS or Unframed
Line Coding: AMI or HDB3
Input Signal: E1, +1 to –27dB (ALBO)
Connection: RJ-48
Timing: Network, AAL1 adaptive
ATM Adaptation Layer: AAL1, Circuit
Emulation Service (af-vtoa-0078.000)
Mode: Short haul, long haul
6.Management Interface
Embedded Operations Channel (EOC)
for SHDSL related parameters,
embedded Web Server interface, VT100,
Telnet, SNMP V2, local supervisory port
7.Industry Listings
FCC: Part 15, Class A, Subpart B
Safety: UL 60950 3rd Class
Canadian Safety: CSA C22.2 No. 950
Industry Canada: CS-03
International Safety: EN 60950
International: EN 55022 Class A;
EN 50081-2
European: CE Mark
8.Diagnostics
Performance: 15-min, 24-hr and 30-day
monitoring (sampled every sec)
Network Loop: SHDSL network loopback
Span Performance Statistics:
Attenuation, SNR
Margin, ES, SES, CRC, LOSWS, UAS
9.Statistics
Tx/Rx cells (AAL1 and AAL5)
Tx/Rx frames (AAL5)
Tx/Rx bytes (AAL1 and AAL5)
Error frames (AAL1 and AAL5)
Frames with CLP bit set (AAL5)
Frames with CI bit set (AAL5)
Frames aborted (AAL5)
Frames with length violation (AAL5)
Frames with CRC error (AAL5)
Frames with HCS error (AAL5)
10.Power Requirement
Voltage Input:
100 to 240 VAC auto-ranging
Frequency: 50 to 60 Hz