Filter
Top Products
Chapter 3 Device Configuration
14 Cajun M770 Manager User’s Guide
Enabling Ports
To enable a port:
1 Select the port in the Chassis View.
2Open the Configuration menu and select Enable Port. A confirmation box
appears.
3 Click Yes. The port is enabled.
OR
1 Right-click on the port and select Enable Port. A confirmation box appears.
2 Click Yes. The port is enabled.
OR
1 Open the Port Configuration dialog box.
2 Change the Administration Status to enabled.
3 Click OK to apply the change. The port is enabled.
To enable more than one port:
1 Select multiple ports by holding down the CTRL key as you click on the ports.
2Open the Configuration menu and select Enable Port. A confirmation box
appears.
3 Click Yes. The selected ports are enabled.
Disabling Ports
To disable a port:
1 Select the port in the Chassis View.
2Open the Configuration menu and select Disable Port. A confirmation box
appears.
3 Click Yes. The port is disabled.
OR
1 Right-click on the port and select Disable Port. A confirmation box appears.
2 Click Yes. The port is disabled.
OR
1 Open the Port Configuration dialog box.
2 Change the Administration Status to disabled.
3 Click OK to apply the change. The port is disabled.
To disable more than one port:
1 Select multiple ports by holding down the CTRL key as you click on the ports.
2Open the Configuration menu and select Disable Port. A confirmation box
appears.
3 Click Yes. The selected ports are disabled.