Filter
Top Products
To learn more about our comprehensive
portfolio, please contact your Lucent
Technologies Sales Representative or
Lucent Business Partner, or visit our web
site at www.lucent.com.
This document is provided for planning
purposes only, and does not create,
modify or supplement any warranties
which may be made by Lucent
Technologies relating to the products
and/or services described herein. The
publication of information contained in
this document does not imply freedom
from patent or other protective rights of
Lucent Technologies or third parties.
Stinger, NAVIS and CellPipe are registered
trademarks of Lucent Technologies, Inc.
Copyright © 2003
Lucent Technologies Inc.
All rights reserved
STG v1.0503
Technical Specifications
1.Electrical Specifications
Power requirements:
Power consumption:
48 VDC @140 Watts
Inrush: All modules have inrush
limiting circuits
DC power source fuse: 5A
2.Physical Specifications
Overall chassis size: 1.75 in (4.4 cm or
1U) high x 17.4 in (44.2 cm) wide x
9.45 in (24.0 cm) deep
Fits in 19 in. rack, supports ETSI
requirements
Unit Weight:11 lbs (5 kg) maximum
Standard EIA, ETSI and 23” mounting
Rack brackets included; optional
brackets for vertical mounting or wall
mounting available
3.Card slot
One for trunk module
4.Trunk Physical Interfaces
Dual-port OC3c/STM-1 single mode
optical SC connector; Dual-port DS3
coaxial (BNC connectors as per ANSI
T1.404); Four- or eight-port T1/E1
RJ48 jack
5.Line Interfaces
Two 50-pin RJ21 connectors for up to
36 SHDSL subscriber lines. First
connector provides access to 24 SHDSL
lines. Second connector provides access
to the remaining 12 SHDSL lines.
6.Other Hardware Interfaces
Two STS-3 electrical cascading interfaces;
10BaseT Ethernet interface; DB9 RS232
console port interface; DB15 interface
for 2 alarm outputs and 4 alarm relay
inputs (1 alarm relay input is dedicated
for detection of loss of AC power);
Two pin BITS connector
7.Status Indicators
Port Status – One 7 segment display with
10 LEDs; Two alarm indicator LEDs;
Ethernet Line Link and Activity Indicators;
Trunk status – On and Activity Indicators
8.Operating Environment
Operating temperature:
-40°C to 65°C (-40°F to 149°F)
Relative humidity:
10% – 95% (non-condensing)
Operating altitude:
up to 13,123 ft (4,000 m)
9.Protocol Specifications
ATM Forum UNI (v.3.0 and v.3.1); ATM
Forum Traffic Management v.4.0
10.Certification
NEBS 1-3; Telcordia GR-63-CORE;
Telcordia GR-1089-CORE
11.Electromagnetic Compatibility
FCC Part 15 Class A; EN55022 Class A;
AS/NZS3548 Class A; VCCI Class A;
CISPR 22 Class A; EN 300386-2; CE/RTTE
12.Safety
UL 1950; CSA 22.2-950; EN/IEC 60950;
CB-Scheme
13.SHDSL Interface Standards
ITU G.991.2 (G.shdsl); Annex A (typical
North America) and Annex B (typ. Europe)
ETSI TS 101 524; ITU G.994.1 (G.hs); ITU
G.997.1 (physical layer management)
14.SHDSL Performance
Multi-rate up to 2320 Kbps symmetric
bandwidth in 2-wire operation.
Multi-rate up to 4.640 Mbps symmetric
bandwidth in 4-wire operation.
15.OC3c/STM-1 Interface Standards
ITU G.957; ITU G.709 (optical);
ATM Forum UNI v3.0 and v3.1;
ANSI T1M1.3/92-005R1; Telcordia
TR-NWT-001112; Telcordia GR-
253-CORE; RFC SONET 1595
16.Optical Specifications
155.52 Mbps per port
Single mode laser optics
Nominal wavelength: 1310 nm
Standard reach: 15km maximum
Transmit power: -8 dBm maximum, -15
dBm minimum
Receive sensitivity: -31 dBm maximum,
as per ITU-T recommendation G.958
17.DS3 Interface Standards
DS3 operates @ 44.736 Mbps per port;
DS3 ports support C-bit/M-framing; PLCP
per TR-TSY-000773 and direct cell
mapping per G.804; ANSI T1E1.1/94-
002R1; T1.107; T1.107a; T1.403; Telcordia
TR.NWT-00082I; ITU G.804; RFC 1407;
TR54014 (AT&T ACCUNET T45 and T45R)
18.T1/E1 Interface Standards
ANSI T1.408 Issue 1; T1E1.4/99-006R6;
ITU I.432; ITU G.703; ITU G.704; ITU
G.804; ATM Forum IMA v1.0 and v1.1;
ATM Forum UNI v3.0 and v3.1; ATM
Forum IMA MIB; RFC1406 MIB
19.T1/E1 Performance
1.544 Mbps full duplex per T1 port,
Up to 12.352 Mbps for T1 IMA; 2.048
Mbps full duplex per E1 port, Up to
16.384 Mbps for E1 IMA; 20.T1/E1
Transmission Output impedance: T1 – 100
ohms, E1 – 120 ohms; Line build out:
T1 – 0 to 22.5 db; Receive sensitivity:
T1 – 0 to 36 db, E1 – 0 to 43 db
20.Model Numbers
MRT19-SL-36: Stinger
®
MRT 19” complete
chassis model with 36 SHDSL ports
MRT19-AD-48: Stinger
®
MRT 19”
complete chassis model with 48 ADSL
ports and no splitters
MRT-AD-36S: Stinger
®
MRT 23”
complete chassis model with 36 ADSL
ports and integrated splitters
*MRT- AD-36S-4T1: Complete chassis
model with 4-T1 ports
*MRT-AD-36S-8T1: Complete chassis
model with 8-T1 ports
*MRT-AD-36S-4E1: Complete chassis
model with 4-E1 ports
*MRT-AD-36S-8E1: Complete chassis
model with 8-E1 ports
MRT-AD-36S-2OC3: Complete chassis
model with 2-OC-3c ports
MRT-AD-36S-2DS3: Complete chassis
model with 2-DS3 ports
*IMA models also available.