Filter
Top Products
3
Introducing IEEE 1394A and 1394B FireWire/Hi-Speed USB2.0/eSATA
3.5" Hard Drive Enclosure - G-S350SUAB2
Thank you for choosing the G-S350SUAB2 aluminum IEEE 1394A and 1394B
FireWire/
Hi-Speed USB2.0/eSATA 3.5" Hard Drive Enclosure. This Aluminum
enclosure supports 3.5” SATA Hard drive up to 3TB. It is simple to install
and comes with all the parts you need to create an external hard drive.
Based on IEEE 1394A and 1394B FireWire/SATA II, SATA I, USB2.0 and USB1.1
specifications the transfer rates are up to:
SATA II - 3.0Gb/s
SATA I - 1.5Gb/s
1394A - 400Mb/s
USB2.0 - 480Mb/s
USB1.1 - 12Mb/s
G-S350SUAB2 can support the speed specification listed above, however its
transfer rates are possible to be lower, and will vary depending upon the
Operating System, type of SATA, 1394A,1394B and USB host controller, SATA
Hard Drive and computer hardware.
About This Guide
Before you begin using the G-S350SUAB2, be sure to read this manual in its
entirety.
This guide contains:
Introducing IEEE1394A and 1394B FireWire/Hi-Speed USB2.0/eSATA
3.5" Hard Drive Enclosure
Hardware Installation
Software Installation
Hard Drive Partition and Format in PC Windows 2000/XP/Vista/Windows7
! FAQ
System Requirements
MacOS 9.2 and MacOS X 10.1 to 10.7 for USB and Firewire connection
! MacOS X 10. to 10.7 for SATA connection
! Windows 2000, Windows XP ,Windows VISTA and Windows7
! Any desktop or Notebook computer with an available SATA, FireWire or
USB port
!
!
!
!
!
!
1394B - 800Mb/s