Filter
Top Products
Assigning TCP/IP Values Manually
If you already have a DHCP server on the network, or if you prefer
not using the XRouter’s DHCP server to assign TCP/IP values auto-
matically, you can input these values manually.
To enter values for the managing computer’s address manually:
1. In the Connect via menu select the Ethernet interface that is
installed on your computer.
2. In the Configure menu select Manually.
a. In the IP
Address field, enter “192.168.1.x” where x is any
variable of your choice ranging from 2 - 252.
(NOTE: No two computers on the same LAN can have the
same IP address or an IP address conflict will occur.)
b. In the Subnet Mask
field enter 255.255.255.0.
c. In the Router
Address field enter 192.168.1.1, the XRouter’s
default address.
d. In the Name Server
Address field enter the DNS information
provided by your ISP. In the Search Domains field enter the
domain information provided by your ISP.
e. Close the TCP/IP window and save the changes.
13