Magma PE6R4 Computer Hardware User Manual


 
MAGMA
18 Chapter 5 Chassis Maintenance
Chapter 5 Chassis Maintenance
Like all computer systems, you will need to perform some routine
maintenance tasks. Some of these include making sure that the air
vents in the chassis are clear of obstructions and that the cooling air
from the fans flows freely. You will also need to check the foam filter
behind the front panel to ensure it is clean, thus allowing for unrestricted
air flow to the fans. You should always keep an eye on all cables to
make sure they are not damaged and are securely connected.
Occasionally, you should remove the chassis cover and check for loose
cards, and remove any dust build-up.
Always to remember to power down your computer and then the
expansion system BEFORE you attempt to perform any maintenance
tasks.
General Chassis Cleaning
The environment where your Magma chassis is operating is a key
element to how often you will need to perform a general cleaning of your
Magma Expansion chassis. To perform a routine general cleaning of
your chassis, you will need the following:
1. Can of compressed air (proper distance, 6 inches)
2. Cotton Swabs
3. Isopropyl (alcohol)
4. Anti static wipes
5. Warm water (for filter)
6. Dish soap (for filter)
Do not use a vacuum because vacuums create ESD.
First, remove the four cover screws with your Phillips screwdriver and
open the cover.