Filter
Top Products
General Tool Handling Guidelines:
1.
Always assume that the tool contains fasteners.
2.
Do
not point
the
tool toward yourself or anyone whether
it
contains fasteners or not.
3.
Do
not actuate the tool unless the tool is placed firmly against the workpiece.
4.
Respect the
tool
as a
working implement.
5.
No
horseplay.
6.
Do
not hold or carry the tool
with
a finger on the trigger.
7.
Do
not load the tool
with
fasteners when any one of the operating controls is activated.
8.
Do
not operate the tool
with
any power source other than that specified
in
the tool
operatinglsafety instructions.
*An improperly functioning tool must not be used.
Sparks sometimes fly when the tool is used.
Do
not
use the
tool
near volatile, flammable materials such
as gasoline, thinner, paint, gas, adhesives, etc.; they
will
ignite and explode, causing serious injury.
The area should be sufficiently illuminated to assure
safe operations.
The area should be clear and litter- free. Be espe-
cially careful to maintain good footing and balance.