Filter
Top Products
INSTALLATION
Software
CAUTION: Do not connect the Graphics Tablet to the computer before installing the driver, as
this could prevent a proper installation.
1. Insert the driver CD into the CD-ROM drive, and wait for the main menu to appear on screen.
NOTE: On most systems, the setup program will start automatically. If it doesn’t, you can
start the setup program manually by selecting My Computer ► CD/DVD-Rom ► Open the
Drive ► Access/Setup.
2. Select Driver Setup, then press the “Enter” key for all subsequent prompts/questions.
3. After completing the driver installation, restart the computer. A small graphics tablet icon
will appear in the system tray, normally at the lower-right corner of the screen, indicating
that the driver has been properly installed and the graphics tablet is operational.
Hardware
Insert the USB connector into an available USB port on your desktop or laptop. After detecting
the graphics tablet, Windows will search for and then install the device driver for it.
Installation Verication
The green LED on the graphics tablet is the primary indicator of operation. The LED normally
remains off, turning on and off only in response to various operations and conditions. Check
the status of this LED as you go through the following test steps.
1. Tap on any surface with the tip of the pen (or press the left button of the mouse) to “wake it
up” if it has gone into standby mode. (The automatic power-saving function may have placed
the pen or mouse into standby mode if either of them is not used for a period of time.)
2. Whenever the tablet itself is activated, the green LED will light briey, then shut off again.
3. When the tablet detects the presence of the pen or mouse, the LED will blink slowly. This
happens when the pen tip is held above the tablet or is placed within the tablet’s work area.
4. When you press a button on the pen barrel (or click on a mouse button), the LED will light.
5. Holding the pen or the mouse on or above the work area will make the cursor on the screen
move accordingly.
4
INSTALLATION
LED
Pen stand
Barrel buttons
USB cable
Adjustable tablet stand, Model 176040 only
Model 176040 shown: See Page 8
for Models 174459 & 174572