Filter
Top Products
7
7
Hot-Swapping
The power to your computer can be on both when the drive is inserted or
removed. Use the key to turn the drive on after inserting it and off before
removing it.
To insert the drive case:
1. Insert the drive case (with drive installed) into the installed docking case,
pushing rmly until the drive is seated.
2. Insert the provided key and lock the case in place by pushing the key
in and turning it clockwise. The LED beneath the switch lights after a
slight delay, indicating the device is ready to use.
To remove the drive case:
1. Unlock the drive case (if locked) by turning the key counterclockwise.
CAUTION: Do not turn the key to unlock the drive case while the drive
is in use, as loss of data may occur.
2. Gently pull on the handle to slide the drive case out.
SPECIFICATIONS
Standard and Certications
• SATA 300/150, CE, TUV, RU
General
• SATA-to-SATA interface
• Supports data transfer rates of up to
133 MBps
• Electronic locking mechanism &
integrated power switch (2 keys)
• Single rear-mount cooling fan,
4 cm (1.5 in.)
• LED indicators: Power & Activity
Connections
• Drive-to-tray: SATA power,
SATA L-type data
• Tray-to-chassis: Centronic-type
connector (gold-plated)
• Chassis: SATA L-type data, 4-pin
Molex 12 V power, 2-pin fan power
Physical
• Material:
- Model 451109: plastic (94V-0 ABS)
- Model 451123: aluminum & plastic
(94V-0 ABS)
• Chassis: 215 x 146 x 42.4 mm
(8.9 x 5.75 x 1.7 in.)
• Tray: 195 x 118 x 36 mm
(8 x 4.7 x 1.5 in.)
• Weight:
- Model 451109: 635 g (22.4 oz.)
- Model 451123: 760 g (27 oz.)
Environmental
• Operating temp.: 23 – 122˚F
(-5 – 50˚C)
• Storage temperature: -4 – 149˚F
(-20 – 65˚C)
• Operational humidity: 10 – 80%
• Storage humidity: 10 – 90%