Filter
Top Products
53
13. Level LED
When a sound is input during Record or Rec-Pause mode, the
LEVEL LED(Green) turns on. A level to turn on is decided in
presetting.
1.
From Stop, press and hold the DISPLAY button for 3 seconds.
2.
Press the VOL + or VOL – button to select Preset Menu. Then
press the 3/8/ENTER button to accept.
3.
Press the VOL + or VOL – button to select Preset 1, 2 or 3.
Then press the 3/8/ENTER button to accept the selected
Preset.
4.
Press the VOL + or VOL – button to select the Level LED item.
Then press the ¢ or 4 button to tab through the Level
LED choices (–54dB, –38dB, –20dB, –12dB or –6dB)
5.
Press the VOL + or VOL – button to select other Menu choices.
When changing the Preset is complete, press the DISPLAY
button to store the changes, or press the STOP/CANCEL
button to exit Menu mode without storing any changes.
14. Skip Back
How to change the Skip Back parameters.
1.
From Stop, press and hold the DISPLAY button for 3 seconds.
2.
Press the VOL + or VOL – button to select Preset Menu. Then
press the 3/8/ENTER button to accept.
3.
Press the VOL + or VOL – button to select Preset 1, 2 or 3.
Then press the 3/8/ENTER button to accept the selected
Preset.
4.
Press the VOL + or VOL – button to select the Skip Back item.
Then press the ¢ or 4 button to tab through the Skip
Back choices (1sec to 60sec)
5.
Press the VOL + or VOL – button to select other Menu choices.
When changing the Preset is complete, press the DISPLAY
button to store the changes, or press the STOP/CANCEL
button to exit Menu mode without storing any changes.