Filter
Top Products
ENGLISH
29
– When the lamp life becomes less than 100 hours and the unit is still on, the remaining lamp life is displayed on the screen
automatically.
– When the lamp life becomes less than 5 hours, the remaining lamp life is displayed on the screen .
To clear the warning, press the MENU key.
– When the lamp life has expired (Lamp Life 0 HOURS), the unit will be immediately turned off, and the WARNING indicator will
light up in red.
❖ Initialize the Lamp Life
If the lamp is replaced to new one, follow this procedure to reset (initialize) the lamp life.
Refer to "Replacing Lamp Unit". (
☞
P.30)
1. Connect the AC power cord after replacing lamp unit. (
☞
P.8)
2. Press the POWER ON key on the remote controller or the POWER key on the projector.
The following message appears for 120 seconds.
3. Select “Yes”, using the 1 / 2 keys.
4. Press the ENTER key . The lamp life indicator is now initialized.
2.
3.
4.
3.
2.
4.
Lamp Life 5 Hours
Warning