Filter
Top Products
WT-8112U-BK www.lacrossetechnology.com/support Page | 4
Stop Mode
If the clock is placed in a dark environment for 72 hours
continually, it will go to the stop mode:
Stop mode is the most power saving condition.
The indoor solar display will not operate and the LCD will
turn OFF.
Press any button to wake up the indoor solar display and re-
activate the transmission with the solar transmitter.
Set Alarm Time
1. Hold ALM to enter Alarm set mode.
2. Press + to adjust values.
3. Press ALM to confirm adjustments and move to
next item.
Setting order: 1. Hour, 2. Minutes
Press ALM to exit, or wait 5 seconds without pressing buttons
to return to the normal time display.
Deactivate/Activate ALM
Press ALM once to deactivate the alarm.
The alarm icon will disappear.
Press ALM once to activate the alarm.
The alarm icon will appear.
Snooze
Press SNZ to silence an active alarm for 10 minutes.
The alarm icon will flash.
Press any button to stop the alarm for 24 hours.
Replace Battery
1. Remove the included solar rechargeable battery.
2. Slide the battery switch to the LEFT to select the alkaline
battery. This help discharge power.
3. Insert a new battery into the compartment, observing the
correct polarity.
4. Replace battery cover
The RX battery symbol indicates the clock battery
is low.
Alarm
Icon
ALARM
+
SNZ