Filter
Top Products
3
Appendix A - Specifications
Network Standard: IEEE 802.3 Ethernet 10Base-T
Transfer rate: 10 Mbps
Topology: Star
Max. cable length: 328 ft. (100 meters)
Ports: 5 RJ-45 jacks
Crossover connector: 1 (port 5)
Auto-partition: Yes
Polarity correction: Yes
Dimensions: 5.1” x 3.4” x 1.1”
Weight: 6 oz.
EMI/RFI: FCC Part 15 Class A
Temperature: 0° C to 45° C (operating); -40° C to 70° C (storage)
Humidity: 10% to 80% (operating, non-condensing); 5% to 90%
(storage)
Power: 7W, 120VAC
Appendix B - 10 Base-T Cable Requirements
10Base-T networks use unshielded twisted-pair cable and 8-pin RJ-45 modular con-
nectors. Use 22-26 AWG, 2- or 4-pair, 100 ohm/ft UTP Category 3 or better cable.
The cable must use solid copper conductors and UL codes CM, CMR, and CMP are
required. Maximum cable length from hub to workstation is 328' (100 m).
Appendix C - Technical Support
In the unlikely event you experience difficulty in the use of the product, or if it does
not operate as described, we suggest you: (1) check the Link status LED, (2) check
for the proper cable type (category 3), (3) check that the port has not been disabled
by the hub due to excessive collisions or (4) consult with your dealer.
If you still cannot resolve the problem, call the MaxTech Service Center at (562)
921-4438 between 9:00 a.m. and 6:00 p.m. (PST Monday through Friday).
If the
nature of your question is related to the network operating system that you
are using, refer to its manual.
Calling the Service Center without complete and
accurate information concerning the nature of the problem will be both time-con-
suming and frustrating for you.
You may also reach us through:
24 hour BBS - (562) 921-7180 24 hour Faxback - (562) 921-9540
Compuserve ID - 71333,44 America Online -
Keyword
: Maxtech
Prodigy -
Jump
: Manufacturers BB World Wide Web - www.maxcorp.com
Email - support@maxcorp.com FTP - ftp.maxcorp.com
Appendix D - Five Year Limited Warranty
MaxTech warrants to the original buyer of this product against defects in material
and workmanship for five years from the date of purchase. During the warranty
period, MaxTech will repair (or at its option, replace) the product that proves to be
defective, provided the product has not been abused, misused, modified, or re-