MaxTech NX-16 Network Card User Manual


 
7
sure that the notch on the ROM matches
that on the socket (refer to Figure 2).
2. Configure the adapter using the SETUP
program to enable the Boot ROM function
by selecting the appropriate address from
the Boot ROM Base Address option. Refer
to Section 2.3 for more information on
running the SETUP program.
3. Follow the Remote Boot Workstation in-
stallation procedure given in your network
operating system manual (i.e. create a Boot
Image on the server for Novell networks, or
start remote booting services on LAN Man-
ager networks, etc.).
Section Three - Driver Installation
The network operating system (i.e. Novell,
LAN Manager, etc.) that you are using requires a
driver to access the network adapter card. The
Maxtech NX-16 Series adapters are NE-2000
compatible and use the NE-2000 driver supplied
with your network operating system. Drivers for
most popular network operating systems are also
included on the installation diskette in separate
subdirectories. Each directory also includes a
Align ROM
and socket
notches
Figure 2