Filter
Top Products
5
9. Brightness Control: Adjusts the display brightness. Turn clockwise
to increase the brightness.
10. Contrast Control: Adjusts the contrast. Turn clockwise to increase
the contrast.
Section 4 - Troubleshooting
No picture, power indicators A, and B off
• Check AC cord is plugged into outlet and monitor.
• Turn on the power switch.
No picture, power indicator A on.
• Check that video cable is connected completely.
• Adjust brightness and contrast controls.
• Turn the computer on.
No picture, power indicator A flashing.
• Monitor is in DPMS “STAND-BY” mode. Press a key or move the
mouse.
No picture, power indicator B on.
• Monitor is in DPMS “OFF” mode. Press a key or move the mouse.
Image is not centered
• Adjust Vertical Position and Horizontal Position controls.
Appendix A - Specifications
Picture Tube Size 14-inch diagonal
Dot pitch 0.28mm
Bandwidth 80 MHz
Data Area 9.84 in. x 7.28 in.
Display modes
Mode Resolution V. Frequency H. Frequency
VGA 640 x 350 70 Hz 31.47KHz
VGA 640 x 400 70 Hz 31.47 KHz
VGA 640 x 480 60 Hz 31.47 KHz
VGA 640 x 480 72Hz 37.86 KHz
SVGA 800 x 600 56 Hz 35.16 KHz
SVGA 800 x 600 60 Hz 38.00KHz
SVGA 800 x 600 72 Hz 48.08 KHz