Filter
Top Products
5
3.2 On-Screen Display
The On-Screen Display (OSD) is enabled by pressing either button of control
pair 6 (see Figure 3-2). Control pair 5 (+ and -) buttons are used to increase or
decrease the value of selected parameter.
A. Horizontal-Size: Adjusts the display width. The (+) button increases the
width. The (-) button decreases the width.
B. Horizontal-Position: Adjusts the horizontal position. The (+) button moves
the display to the right. The (-) button moves the display to the left.
C. Vertical-Size: Adjusts the display height. The (+) button increases the
height. The (-) button decreases the height.
D. Vertical-Position: Adjusts the vertical position. The (+) button moves the
display up. The (-) button moves the display down.
E. Pincushion: Adjusts the shape of the left and right sides of the display. The
(+) button makes the display sides curve out. The (-) button makes the
display sides curve in.
F. Trapezoid: Adjusts the shape of the left and right sides of the display. The
(+) button makes the display sides slant out. The (-) button makes the display
sides slant in.
G. Rotation: Adjusts the amount the display area will tilt. The (+) button rotates
the display clockwise. The (-) button rotates the display counter-clockwise.
H. Degauss: Press (+) or (-) to clear color impurity of the display.
I. Recall: Press (+) or (-) to reset parameters A-G to factory default values.
AB DEFGH
I
C
1280 X 1024
H: 64KHz V: 60Hz