Filter
Top Products
Appendix A: DHCP Services
1. If you are installing your unit into a network with DHCP services, (usually a network
with a server), your unit will automatically obtain an IP address for the MaxAttach
unit. That’s fine.
2. If you installed your unit into an environment without a DHCP server, then your
MaxAttach unit will become a DHCP server with a default static address of
192.168.42.252 with a subnet of 255.255.255.0.
3. In order to configure your MaxAttach unit, you need a computer with an address in this
IP range. You may need to temporarily change the IP address for your computer.
Otherwise, MaxNeighborhood will return an error when you try to select the
MaxAttach unit.
4. If you later move the MaxAttach unit into a DHCP environment, you must ensure that
DHCP Services are re-selected.
5. To do this, check the box, Obtain IP Address Automatically. It’s under the Manage
Network heading in the left navigation bar. If you do not do this, you can bring down
your network.
Appendix B: Backup
Your MaxAttach NAS 4000 unit can be backed up with Windows NT/95/98, ARCserve
by Computer Associates and Backup Exec by Seagate Technology.
Appendix C: Important Safeguards
• Read all of the instructions.
• Save these instructions for later use.
• Follow all warnings and instructions marked on the MaxAttach unit.
• The MaxAttach unit should be operated using only the type of power source indicated
on the product label.
• This MaxAttach unit must be serviced only by a Maxtor authorized representative.
Caution
Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type battery recommended by the manufacturer. Dispose of used batteries accord-
ing to manufacturer's instructions.
Warning This is a Class A product. In a domestic environment, this product may cause
radio interference in which case the user may be required to take adequate measures.
14
This Class A digital apparatus meets all requirements of the Canadian
Interference Causing Equipment Regulations.
Cet appareil numerique de la classe A respecte toutes les exigences du
Reglement sur le materiel brouilleur du Canada.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful inter-ference,
and (2) This device must accept any interference that may cause undesired
operation.