Mega System Tech RS485 Network Card User Manual


 
NET101 User’s Manual -16-
Chapter 5: NET101 Web Manager
This allows the user to choose either to set NET101 IP Address manually or via
DHCP. The above items can be set in Netility as well. NET101 will reboot after
the above settings have been changed.
ii. DNS Server IP
Fig.20 NET101 DNS Server IP
Primary DNS Server IP
This item sets NET101 primary DNS Server IP address. Enter a value here if
you have a DNS Server IP.
Secondary DNS Server IP
This item sets NET101 secondary DNS Server IP address. NET101 will use the
secondary DNS Server IP address if the Primary DNS Server IP address is not
working.
iii. Ethernet
Fig.21 NET101 Ethernet Settings
Connection Type
This item sets the communication speed between NET101 and the Network.
Choose “Auto Sense” to let NET101 automatically decide on the appropriate
connection speed. NET101 will reboot if this setting is changed.
iv. Dynamic DNS
Fig.22 NET101 Dynamic DNS Settings
Service Provider
For users with a Dynamic IP, NET101 can be configured to point the current IP
(as provided by your ISP upon each successful dial-up to the internet) to a
dynamic DNS provider. This will enable you to locate NET101 every time the
IP changes due to an ADSL connection redial.
To enable this function, you will first have to register with either one of these
three service providers;